Core Concept & Why It Matters on Board
In tanker operations, precision in cargo measurement is the difference between a profitable voyage and a multi-million dollar legal dispute. Because liquid cargo is dynamic—expanding with temperature, shifting with ship motion, and interacting with water—the “volume” observed in a tank is never the “volume” sold.
At the heart of these operations are two fundamental methods of measurement: Ullage and Innage (also known as Sounding).
Ullage vs. Innage (Sounding)
- Ullage: The vertical distance from the top of the tank (the reference point or rim) to the surface of the liquid cargo. This is the preferred method in most modern oil tankers to avoid contact with potentially corrosive or explosive cargo.
- Innage (Sounding): The vertical distance from the bottom of the tank to the surface of the liquid cargo.
Measurement Tools
- UTI Tapes (Ullage/Temperature/Interface): A manual tool consisting of a steel tape with specialized sensors at the tip. It measures the distance to the surface, the temperature of the cargo, and the presence/depth of water at the bottom (the interface) in a single pass.
- Radar Gauges: Automated, non-contact sensors installed in the tank. They provide continuous, real-time data to the Cargo Control Room (CCR). While highly accurate, they must be regularly calibrated against manual UTI soundings to ensure sensor integrity.
The Complexity of the “Observed” Volume
The volume measured by a gauge is the Total Observed Volume (TOV). However, TOV is subject to several variables:
- Ship Motion: Trim (fore/aft inclination) and List (side-to-side inclination) change the shape of the liquid surface relative to the tank geometry.
- Temperature: Liquids expand and contract significantly. A change in crude oil can alter volume by nearly .
- Water Content: Water is denser than oil and settles at the bottom, occupying volume that must be accounted for separately to determine the true cargo quantity.
Key Formulas, Tables & Rules
To convert raw measurements into a bill of lading quantity (Mass in Metric Tonnes), a rigorous mathematical chain must be followed.
1. The Volume Conversion Chain
The process moves from what is physically seen to what is legally recognized.
TOV GOV GSV
- TOV (Total Observed Volume): The volume measured in the tank, including any free water.
- GOV (Gross Observed Volume): The volume of the cargo itself, excluding the volume of free water.
- GSV (Gross Standard Volume): The volume corrected to standard conditions ( or ) using the Volume Correction Factor (VCF).
2. ASTM Table 54A/54B and 6A/6B: The VCF
The ASTM D1250 (API MPMS Chapter 11.1) tables are the global standard for petroleum measurement.
- Table 54A: Used for generalized crude oils and gas condensates (metric, based on density at in or ).
- Table 54B: Used for generalized refined petroleum products (metric, based on density at ).
- Table 6A/6B & 54C: Tables 6A/6B provide US customary VCF at based on API gravity; Table 54C handles special/individual thermal expansion coefficients.
- VCF (Volume Correction Factor): A multiplier derived from the cargo’s observed temperature and standard density to bring the observed volume to the standard temperature ( or ).
3. Mass Conversion: Table 56
Once the GSV at is known, it must be converted to mass or weight (Metric Tonnes).
- Mass in Vacuum vs. Weight in Air: Laboratory density certificates report density in vacuum, so multiplying yields Mass in Vacuum. Commercial Bills of Lading typically require Weight in Air, which deducts air buoyancy (approximately ).
- Table 56: Provides the conversion from GSV (at ) and standard density to Weight in Air (Metric Tonnes in air).
4. Correcting for Geometry: Trim and List
If a tank is not perfectly upright, the liquid surface is not parallel to the tank floor.
- Trim Correction: Adjusts for the longitudinal tilt.
- List Correction: Adjusts for the transverse tilt.
- Correction Factor (): Usually applied to the observed ullage or volume via tank tables (sounding tables) specific to the vessel’s hydrostatics.
5. Operational Definitions
- OBQ (On Board Quantity): The amount of cargo left in the tanks from a previous voyage.
- ROB (Remaining On Board): The amount of cargo (or fuel/slops) currently in the tanks.
- COW (Crude Oil Washing): The process of using crude oil as a cleaning agent to wash tank walls, improving stripping efficiency and reducing sludge.
- VEF (Vessel Experience Factor): The historical statistical ratio comparing a tanker’s measured shipboard cargo volume (TCV minus OBQ) against shore-measured Bill of Lading quantities across qualifying voyages.
Step-by-Step Worked Numerical Example
Scenario: A single cargo tank on a VLCC is being measured after discharge. We need to find the mass of the remaining cargo in Metric Tonnes.
Given Data:
- Tank Geometry: Cylindrical, height , radius .
- Measured Ullage: .
- Measured Interface (Water): (water at the bottom).
- Observed Cargo Temperature: .
- Cargo Density in Vacuum at (): ().
- Ship State: Trim by stern, List Starboard.
- VCF (from ASTM Table 54A/B at ): .
- Air Buoyancy Reduction (ASTM Table 56): (giving Weight Correction Factor in air ).
Step 1: Calculate Liquid Heights
- Total Liquid Depth (Innage) .
- Oil Layer Thickness .
Step 2: Calculate Volumes (Ignoring Trim/List for this step)
- Total Observed Volume (): .
- Water Volume (): .
- Unadjusted Gross Observed Volume (): .
Step 3: Apply Trim and List Corrections
Assume the vessel’s sounding table provides a combined correction factor () of for the current trim and list.
- Corrected GOV (): .
Step 4: Convert to Standard Volume (GSV)
- GSV
- GSV .
Step 5: Convert Volume to Mass and Weight in Air (Metric Tonnes)
- Mass in Vacuum (MT): .
- Weight in Air (MT, per ASTM Table 56): .
Final Result: The cargo remaining in the tank is (mass in vacuum) or (weight in air).
Practical Operational Procedures & Chief Mate Checklists
Pre-Cargo Operations (Loading/Discharging)
- Verify Gauging Equipment: Ensure UTI tapes are clean and radar sensors are zeroed and calibrated.
- Tank Sounding/Ullage: Perform manual soundings in all tanks to establish the “Baseline” (OBQ).
- Water Check: Always check for the presence of water at the bottom of each tank using the UTI interface probe.
- Temperature Verification: Confirm temperature readings are stable before recording.
- Trim/List Assessment: Record the ship’s trim and list from the loading computer or manual calculation.
During Operations
- Monitor Gauges: Observe real-time changes in ullage to detect unexpected flow rates or leaks.
- Consistency Checks: Compare radar gauge readings with manual soundings at regular intervals (e.g., every 4 hours).
- Density Monitoring: Periodically sample the cargo to ensure density matches the shore figures.
Post-Cargo Operations (Discharge Completion)
- ROB Survey: Conduct a full ullage survey of all tanks to determine the Remaining On Board (ROB) quantity.
- Water Detection: Re-verify water levels (Innage of water) to ensure no water ingress occurred during the voyage.
- Discrepancy Report: If the difference between shore figures and ship figures exceeds the allowed tolerance (typically ), notify the Chief Officer and the terminal immediately.
Common Calculation Pitfalls, Hazards & Real-World Failure Modes
-
The “False Bottom” (Emulsions): In tanks with high water content or after COW, an emulsion layer (slop) can form between the oil and water. A UTI tape might “bounce” off the emulsion instead of the actual water interface, leading to an underestimation of water and an overestimation of cargo.
-
Temperature Lag: Measuring temperature at the surface of the liquid might not reflect the true bulk temperature of the cargo if thermal stratification is present. Always use the temperature sensor at the correct depth.
-
Incorrect VCF Application: Applying the VCF to the Total volume instead of the Cargo volume (forgetting to subtract water first) is a common clerical error that leads to massive mass discrepancies.
-
Trim/List Neglect: In tanks with significant length (e.g., VLCC tanks), even a small trim can cause the liquid to “climb” one end of the tank. Failing to apply the correction factor from the sounding tables will lead to significant volume errors.
-
Radar Interference: Foam, heavy turbulence during loading, or even heavy rain can interfere with radar gauge accuracy. Always verify radar readings with manual soundings during “rough” periods.
Applicable IMO Codes & Standards
- ISGOTT (International Safety Guide for Oil Tankers and Terminals): Provides the primary safety guidelines for cargo handling and measurement.
- ASTM D1250: Standard Guide for the Use of API Petroleum Measurement Tables.
- MARPOL Annex I: Regulations regarding the prevention of pollution by oil, including requirements for oil discharge monitoring and tank management.